WOODRIVER 4-Piece Premium Woodworking Butt Chisel Set - Sharp Carbon Steel Blades for Fine Carpentry, DIY Projects & Furniture Making

Quickly shipped. Nice box. A little pricey. Now to the more important factors:Handles are good, well fitted, but I will probably rough them up with some finer grit sand paper to aid me in gripping them. I work in a shop without air conditioning… The hardness of the wood handle are excellent for their intended, appropriate use, & the handle shape fits well “in the hand.”The metal was flat on the back, requiring little effort on a 400/1000 diamond stone, with a few extra leather strop strokes for good measure:I spent about 5 minutes per chisel back, which speaks well of how flat the chisels were “straight out of the box.”On the other side, the bevels could have been machined a little better with a bit finer grind, but they were good enough & consistently angled. I spent about 20 minutes per chisel bevel tuning them, & all “cut paper” to demonstrate they were sharp enough. I used the same 400/1000 diamond, on the bevels as on be backs, then another couple minutes each on a strop charged with 6000 grit then about a minute each on plain leather “to shine them up.”Their steel appears to be as good of quality as the Robert Sorby I paid as much for as the whole set of four butt chisels, (of course, the Sorby is twice as long, is a paring chisel, & is legendary), so it all balances out in the end.In any event, the four chisel butt set is excellent, & I would rate it a 9 on a scale of 10. I took one point off because the handles are not a 10 for me, & the steel, although very good, could be a little harder.All in all an excellent set & a fine addition to my woodworking tools.